![]() ![]() Place the crossbow stock blank in a wood or soft jaw vise and start shaping the stock using rough wood files(I suggest round, flat and half round files to get in all the nooks).The shaping you will be required to do by eye. Then pin it with a 3/16 steel rod cut to a length of about 3'', This step is important to retain the structural integrity of the handle. Next, using a tablesaw or dremel, cut a 1/4'' wide groove on the top of the crossbow for the arrow track.ĭrill a hole at an angle up the handle using a 3/16 bit. When you are happy with the shape, cut out your design with a bandsaw. Next transfer your drawing onto the hardwood block by tracing the template along its edge. Using copy paper or your printer's scanner, copy your drawing onto another piece of paper and cut out a template using the outer edge of the design as a guide. After you find or make a design you like, draw it out on paper to 1/1 scale. And various other tools you might find in your workshop including screwdrivers, pliers, hammers and saws.įirst plan it out.2 brass colored countersunk wood screws 1/2'' long.1/8 steel compression spring(at least an inch long).metal 50 lb pistol crossbow prod found here. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |